The Journal of Industry and Technology

Industrial Analytical Instrumentation

Euro Technology

Serving industry for over 36 years
Three leading magazines for key executives,  engineers, universities,
manufacturers, laboratory technicians, scientists, and research establishments

Total engineering and manufacturing

Stick and Start driverless intralogistics transport system

BITO Storage Systems offer a new driverless intralogistics transport solution that is easy to implement, adapt or remove and does not require any permanent fixtures. LEO LOCATIVE is 'low-level' Automated Guided Vehicle (AGV) that simply follows tape laid on the floor, which can be added to or removed whenever required - It does not require a Wireless Local Area Network (WLAN) or a central control computer. This provides an agile, user-friendly option for all kinds of order picking operations and is particularly useful for ecommerce, order picking peaks and assembly processes. LEO can connect production lines with the warehouse, receiving area and shipping area - reducing the risk of damage and the need for manual handling of heavy loads.

BITO developed LEO at its manufacturing facilities in Meisenheim, Germany, where LEO has already been launched and received tremendous interest as an efficient and flexible low-level AGV solution that offers quick payback. It was developed in collaboration with the Fraunhofer Institute for Material Flow and Logistics (IML) in Dortmund. The safety concept was worked out and tested in close cooperation with the German employers' liability insurance association.

Image 1: BITO's self-propelled transport system called LEO Locative has a wide range of applications and is very simple to operate.

Image 2: Layout markers show where the stations are located. For example, they tell the transporter that it must turn right at the next fork in order to get to Station 2. Destination markers on the route can give commands to the transporter. For example, they can tell it to drive to Station 3. Staff can change a transporter's destination, via a display, while it is moving. Labels can also contain driving commands and tell the transporter to reduce its speed. This can be useful if there are many people in the building.

LEO transports loads to, or picks loads up, from a transfer station - which can also be easily moved as required - for dropping off at other stations along the taped trail. The vehicles do not stop to be loaded or unloaded at the stations, which have load grippers and bin identification sensors to ensure the right bin is picked up or dropped off, providing a seamless flow. Filling levels are also recognized.  This ensures fast and easy bin pick-up and drop-off wherever the items are required.

Because the easily adaptable LEO is not a permanently fixed system, warehouse or factory floor space is available for other uses when required. This makes it an ideal alternative to low-level conveyors for the internal transportation of bins and containers up to a maximum of 600 x 400 mm and loads up to 20 kg. 

Implementation is a simple 'stick and start' process: red marker tape, which provides an optical track to guide LEO, is laid out as a closed loop. Navigation commands and tasks are transmitted via floor markers - adhesive signal transmitters placed along the path to provide LEO with information on the path layout, target points and operating commands. Target stations can be entered via a display and LEO's e-ink reader will direct the vehicle to its target.

Proximity sensors detect obstacles and maintain a distance between vehicles. A stop and go sensor at its rear reactivates the LEO without manual intervention.  When conditions change, such as increased pedestrian traffic, LEO reacts thanks to its speed control. There is also an emergency button to override the system.

Image 3: LEO transports loads to, or picks loads up, from a transfer station.

Image 4: A camera sensor ensures that the transporter stays on its track, and it can also read data matrix codes. Markers on the route provide driving commands. 

LEO can be customised to specific needs, implemented rapidly and changed just as easily whenever required and without any external support. If a change of path is necessary - for example to add a picking station or a packing area - it only needs a strip of tape to be laid and floor markers to be added for the LEO to dutifully follow its new instructions without pause for thought. Removing these sections is then just as simple - simply pull up the tape and floor markers.

The patented transfer stations can be either pick-up only, drop-off only or twin stations to carryout both functions. A buffer conveyor accommodating several bins can be added to allow continuous operations. The addition of a picking table allows picking and sorting can be performed at the station. The stations have been adapted to optimum working height to reduce manual lifting and lowering.

The number of vehicles and transfer stations can be adapted to meet business needs without the need for external support.

LEO is driven by twin electric motors, giving a speed of up to 0.8 m/s and its battery, located at the bottom of the unit, will last at least 8 hours between charges. It can be recharged in the case or exchanged with a fully charged battery.

LEO LOCATIVE can play a key role in improving warehouse, distribution centre or factory layout efficiency as distances between workstations and machines are no longer an issue. Offering predictable transport times, LEO can act as a buffer between processes while also freeing staff to concentrate on their primary function rather than fetching items.

For order picking, LEO allows pickers to remain in their zone, placing picked goods on a transfer station, for transport to the next zone or to goods out where orders can be collated. The solution reduces walking for pickers, increase pick rates and works equally well in reverse for replenishment or returned goods.

In a factory, where there may be several assembly workstations, LEO can be programmed to stop at each workstation to pick up work in progress or finished goods and move them to another target point such as a storage area or a station for the next assembly stage. This solution avoids pile-ups at workstations and frees up space by transporting goods to stock areas. Again, walking distances are also dramatically reduced.

Commenting on the innovative new system, Edward Hutchison, managing director of BITO Storage Systems said:  "Repetitive movements of items is common in distribution and manufacturing and even small distances can add up to a considerable amount of unproductive time. In addition to saving time, LEO is supremely space efficient as it obviates the need for floor-mounted structures that create obstructions, thus keeping an entire floor area clear for pedestrians, vehicles and other operations.

"LEO is a very flexible, plug and play order picking solution - its beauty lies in its simplicity. Being a standalone system, it does not communicate with any other piece of materials handling equipment or warehouse management system. This means that no integration is needed and the efficiency gains it can deliver will see a quick return on investment. BITO can, of course, also provide racking, shelving, bins and containers to provide a complete solution around LEO."

For further information, view website: www.bito.com

BITO's EQ collapsible bins save space - and fingers!

BITO Storage Solutions has introduced its new EQ range of collapsible containers at IMHX 2016 as a space saving Euro-container option for transporting goods - folding the sides of an empty EQ container saves up to 75% on volume.

Sized 600 x 400 mm at the base, the EQ container has two height options: 285 mm and 320 mm. Both versions can accommodate loads of up to 20kg. Depending on use, the ribbed base or double base options provide additional strength and rigidity, which means the EQ can be used in automated warehouses and double base options can take loads up to 50 kg.

To reduce the risk of squeezing fingers, which can be a common issue on other similar containers, while also maintaining handling efficiency, the EQ has been designed with an innovative 'seesaw' locking/unlocking profile on its short sides. This allows the sides to lock open with a simple push on the box shoulder using thumb or the heel of the hand.

Options for the EQ container include permanently attached interlocking lids, tamper evident security seals and a fold-up grip that allows convenient carrying of filled boxes. Address labels can be inserted into the inside label holders - a transparent window cover allows clear visibility from the outside. Labels fitted inside are loss-proof and keep the box sides clean from sticky labels thus avoiding time-consuming removal of glue residue.

BITO Storage Systems in profile
With its head office and main production facilities in Germany, BITO is an internationally operating manufacturer of storage and order picking systems. The company's product range includes shelving and racking; storage and order picking systems; bins and containers and warehouse equipment and accessories. Clients include ASDA, Lidl, Alliance, AAH, Phoenix Healthcare, Jaguar Land Rover, Staples, Next, BMW and John Lewis.

For further information, view website: www.bito.com

Quick page links - Display rates - Features - Magazine profile - Home page - Company index - Page 214


Industrial and Technological Publications
Leading the way in on-line magazine publishing
The Journal of Industry and Technology - Euro Technology - Industrial Analytical Instrumentation
Title registered in London 1978. Registration number 2334966

Twitter: www.twitter.com/@thejournalofind - Twitter: www.twitter.com/@eurotechnologym - Twitter: www,twitter.com/@industrialanaly
Google+: www.google.com/+ThejournalofindustryandtechnologyBiz21 Linkedin: www.linkedin.com/in/williamdigbyhammertonthejourna
Google+: www.Google.com/+Eurotechnologymagazine21E  Google+: www.google.com /+Industrialanalyticalinstrumentation21IA
Follow on Facebook: http://facebook.com/pages/The-Journal-of-Industry-and-Technology/171016159602089