The Journal of Industry and Technology

Industrial Analytical Instrumentation

Euro Technology

Serving industry for over 36 years
Three leading magazines for key executives,  engineers, universities,
manufacturers, laboratory technicians, scientists, and research establishments

Surface Mount Technology production equipment

MIRTEC exhibit complete line of technologically
advanced 3D AOI and SPI inspection systems at APEX

"The Global Leader in Inspection Technology," premiered its complete line of 3D AOI and SPI Inspection Systems in Booth #3101 at the 2017 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry which took place Feb. 14-16, 2017 at the San Diego Convention Center.

"We are very excited about the products that we will be presenting at APEX 2017," stated Brian D'Amico, President of MIRTEC's North American Sales and Service Division. "MIRTEC will feature a total of seven (8) inspection systems specifically designed to address the full spectrum of inspection requirements associated with the electronics manufacturing industry."

The award-winning MV-6 OMNI 3D AOI Machine is configured with MIRTEC's exclusive OMNI-VISION® 3D Inspection Technology which combines our 15 Mega Pixel CoaXPress Camera Technology with MIRTEC's revolutionary Digital Multi-Frequency Quad Moiré 3D system in a newly designed cost effective platform. MIRTEC's 15 Mega Pixel CoaXPress Vision System is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of 3D inspection systems.  MIRTEC's Digital Multi-Frequency Quad Moiré Technology, provides true 3D inspection using a total of four (4) Programmable Digital Moiré Projectors to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow. Fully configured the new MIRTEC MV-6 OMNI machines feature four (4) 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel Top-Down Camera. There is little doubt that this new technology has set the standard by which all other inspection equipment is measured.  MIRTEC will have two (2) MV-6 OMNI's on display one configured with a 10um lens for High-Performance applications and the other with a 15um lens for High-Speed applications.

MIRTEC's award-winning MS-11E 3D SPI Machine is configured with MIRTEC's exclusive 15MP CoaXPress Vision System, providing enhanced image quality, superior accuracy and incredibly fast inspection rates.

The machine uses Dual Projection Shadow Free Moiré Phase Shift Imaging Technology to inspect solder paste depositions on PCBs post screen print for insufficient solder, excessive solder, shape deformity, shift of deposition and bridging.  The MS-11e uses the same robust platform as MIRTEC's MV-6 OMNI Series.

MIRTEC displayed two (2) MS-11e's one configured with a 10um lens for High-Performance applications and the other with a 15um lens for High-Speed applications.

MIRTEC's MV-7 OMNI-QHD 3D AOI Machine features the next generation of MIRTEC's award-winning OMNI-VISION® 3D Inspection Technology in a High-Performance AC Servo Drive Platform.  This revolutionary technology combines our proprietary 15MP CoaXPress Vision System with MIRTEC's
exclusive Quantum High Definition (2048x1536) Digital Multi-Frequency 3D Projection Technology to provide unprecedented image quality, accuracy and repeatability necessary for precision inspection of SMT devices on finished PCB assemblies. This new technology will, undoubtedly, set the standard by which all other 3D inspection equipment will be measured. The MV-7 OMNI-QHD machine also features four (4) 10 Mega Pixel Side-View Cameras for inspection of Regions of Interest which are not accessible with the 15 MP Top-Down Camera. 

MIRTEC's MV-6E In-Line AOI Machine combines MIRTEC's exclusive 10 Mega Pixel Top-Down camera with a Precision 13.4um Telecentric Compound Lens and four (4) 10 Mega Pixel Side-View Cameras in a newly designed cost effective platform. The MV-6e is also configured with MIRTEC's exclusive INTELLI-SCAN®3D Laser System, providing superior lifted lead detection for gull wing devices and four-point height measurement capability for co-planarity testing of BGA and CSP devices.

The MV-3L Desktop AOI Machine is the industry's most widely accepted five (5) camera desktop AOI system.  This system is configured with one Top-Down View 10 Mega Pixel camera with a Precision 13.4um Telecentric Compound Lens and four (4) 10 Mega Pixel Side-View Cameras.  It also features our exclusive INTELLI-BEAM® 3D Laser System. This advanced technology provides: four-point height measurement capability for co-planarity testing of BGA and CSP devices as well as enhanced solder paste measurement capability.

New at the IPC APEX EXPO, MIRTEC featured an MV-3L OMNI 3D Desktop AOI Machine. The MV-3L OMNI is configured with MIRTEC's exclusive OMNI-VISION® 3D Inspection Technology which combines our 15 Mega Pixel CoaXPress Camera Technology with MIRTEC's revolutionary Digital Multi-Frequency Quad Moiré 3D system in a newly designed desktop platform.  MIRTEC's 15 Mega Pixel CoaXPress Vision System is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of 3D inspection systems.  MIRTEC's Digital Multi-Frequency Quad Moiré Technology, provides true 3D inspection using a total of four (4) Programmable Digital Moiré Projectors to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow.  Fully configured the new MIRTEC MV-3L OMNI machine features four (4) 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel Top-Down Camera.®

MIRTEC's total quality management system software, INTELLISYS® was also displayed at the IPC APEX EXPO. This software suite promotes continuous process improvement by allowing manufacturers to track and eliminate defects on inspected assemblies.

MIRTEC is a leading global supplier of automated inspection systems to the electronics manufacturing industry.

For further information, view website: www.mirtec.com

MIRTEC receive the prestigious 2017 Service Excellence
Award (SEA)  in the Test and Inspection category during APEX

MIRTEC, received the prestigious 2017 Service Excellence Award (SEA) from
Circuits Assembly magazine in the Test and Inspection category. Mike Buetow, Circuits Assembly's Editor-in-Chief, presented the award to Brian D'Amico, President of MIRTEC's North American Sales and Service Division during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center.

"The 2017 Service Excellence Award is the 6th award that MIRTEC has received for outstanding customer support," stated D'Amico, "We at MIRTEC, recognize that customer satisfaction is absolutely essential to the future growth of our organization.  As such, we take great pride in our ability to provide prompt, courteous and knowledgeable support to our valued customers.  It is my pleasure to accept this award on behalf of our support staff for a job well done!"

MIRTEC won the award based on its outstanding customer ratings. With more than 30 sales and support centers located strategically throughout North America, the company is able to provide its customers with a full range of services including; consultation, installation, equipment training, and after-sales support. D'Amico continued; "Our business philosophy is quite simple but all too uncommon these days; We provide our customers with the highest quality products and services at competitive pricing.  We recognize that our customers are the source of our future growth and as such we strive for a strong, reliable and long-term partnership based on trust and respect.  We listen to their needs and deliver prompt service. We consistently work to meet and try to exceed their expectations. We aim to bring positive changes to their business.  In short, our ultimate objective is the absolute success of our customers."

Sponsored by
Circuits Assembly, the Service Excellence Awards for Electronics Manufacturing Services (EMS) providers and electronics assembly suppliers honor companies excelling in the crucial area of customer service. The program, now in its 24th year, functions as a way for participants to see how they compare to peers in customer satisfaction and is audited by an independent third party.

For further information, view website: www.mirtec.com

Quick page links - Display rates - Features - Magazine profile - Home page - Company index - Page 686


Industrial and Technological Publications
Leading the way in on-line magazine publishing
The Journal of Industry and Technology - Euro Technology - Industrial Analytical Instrumentation
Title registered in London 1978. Registration number 2334966

Twitter: www.twitter.com/@thejournalofind - Twitter: www.twitter.com/@eurotechnologym - Twitter: www,twitter.com/@industrialanaly
Google+: www.google.com/+ThejournalofindustryandtechnologyBiz21 Linkedin: www.linkedin.com/in/williamdigbyhammertonthejourna
Google+: www.Google.com/+Eurotechnologymagazine21E  Google+: www.google.com /+Industrialanalyticalinstrumentation21IA
Follow on Facebook: http://facebook.com/pages/The-Journal-of-Industry-and-Technology/171016159602089